This can be the trickiest part of the installation so pay close attention to this step. Drag your fingertips downward through the area shown using firm pressure and hold. Doing this will stretch the material down into this heavily contoured area and pull out the majority of the excess material along the front edge of the kit. It is important to not let the material pop back up in the area above your fingertips. For the most part, suction alone will be holding the material down at this point. If you don't hold firm, even pressure with your fingertips on the film, air will be allowed back in and the film will come back up. A small bubble under the film is allowable as you can see in the picture, but any more than what is shown and you will need to release the material, re-wet the area and retry this step. With the material now in this position, follow behind your fingertips with the squeegee to complete the step.

Back to main menu Previous photo Next photo